E-Lite Semiconductor Inc.
E-Lite Semiconductor Inc.
Add to Cart
Exterior Outdoor Flood lighting for led parking lot area light fixtures
Features:
1. E-lite fixture of IP66 waterproof grade(IP67 for driver), suitable for Indoor and outdoor wet place of court, construction site, tower crane, workshop, park, playground...
3.High lumen efficiency up to 140lm/w from lumileds 3030 high power.
4. Long lifespan L70(B10)150,000 hours(From TM-21 caculated), 6-8 years if 12hrs/day working.
5. High thermal conductivity housing aluminum to assure strong dissipation, operation temperature up to 60℃.
6. Stable performance external constant-current driver, failure rate lower than 0.5‰.
7. Eco-friendly, no hazardous substance, corrsion resistance.
8. ETL/DLC/CB/CE/RoHS standard.
Catalogue:
2019 E-Lite EDGE High Bay - Flood(140LPW 60D).pdf
Specific:
Input Voltage Range: 100-277VAC
Frequency: 50/60Hz
10KV Surge Protector
DLC Rated: 100W (50-450W available)
>THD(%): <20
Dimmability: 0-10V Compatible
Efficiency: Up to 140lm/W
Color Rendering Index (CRI): 70+
Color Temperature (CCT): 5000K
Lens Materials: PC Optics 13 types of beam Angle
Housing Materials: Aluminum
IP Rating: IP66 Outdoor Rated
Certification: ETL DLC CB CE RoHS
Life Span: 100000+ Hours
Warranty: 5 Years
Life Time 100,000 Hours
UL Listed
LM90 – 360000 Hours
Warranty 5 Years Rock Solid
E-Lite lighting fixture selection:
1. High power: General luminaire should be above 100-450W @140LM/W. Since the height of the gantry crane is about tens of meters, it has the characteristics of wide adaptability and large working range. In order to meet the illumination requirements of the working surface.
2. Long working life-time: It is necessary to install a lamp with a long service life L70>150000hrs from TM-21 caculated. In case of high height of the gantry crane, it is not easy to repair after the lamp is damaged.
3. Safe and reliable: It is necessary to configure safe and reliable lighting fixtures to ensure the lighting safety of the port terminal and prevent fire events caused by short-circuit of the lamps.There are many kinds of goods on the port terminal and the environment is complex.
4. High degree of protection: The lamp housing is made of high-quality 6063 aluminum alloy extrusion, and the outer surface is treated by high-pressure electrostatic spray to improve the overall anti-corrosion level of the product. The port is in a humid environment all year round, so the waterproof and dustproof level of the lamp is required to be high. The lamp with high protection level can prevent water vapor from entering the inside of the lamp body and prolong the service life of the lamp.
5. The whole lamp has an independent heat dissipation system, the drive is external, and the power supply is internally IP66 sealed with a rubber seal to provide heat dissipation. Waterproof, the protection level of the luminaire. Do not worry about the wet environment of the port terminal.
6. Good light transmission: It is necessary to use light-transparent lighting fixtures, due to the relatively heavy fog at the port terminal, in order to meet the illumination requirements of the port terminal working surface,
Types of Light Distribution for Area Lights:
Area lights are available with different light distributions of 13 optical lens form JP. so that you can select the fixture that will best direct the light where you want it to go.
When lighting a street or sidewalk, you want most of the light on the path. Alternatively, in a parking lot setting, you would want a much wider light
distribution, allowing both cars and aisles to be well lit. This can help pedestrians feel safer getting back to their cars and reduce incidents in your
parking lot.
